Top 9 Fan Controller 3 Pin – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.



Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, DEEPCOOL FH-10 Integrated Fan Hub, Occupying only One 4-pin Motherboard Header

DEEP COOL #ad - Powered by a stable sata connection to the system PSU for up to 10 fans. Only speed of Fan 1 can be identified by the system. That is, all pwm fans will run at the same DUTY RATIO. Velcro and screw mountings applicable for the tower interiors. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. They will run at FULL SPEED. Capable of connecting to 10 PC fans simultaneously for cooling the computer system.
BrandDEEP COOL #ad
ManufacturerDEEPCOOL #ad
Height1.18 Inches
Length8.39 Inches
Width4.41 Inches
Part NumberFH-10



SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin, Chassis Fan Hub

GELRHONR #ad - Built-in double-sided adhesive: this compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis. Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.

Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power. Sata cooling fan splitter suit for 12v 3pin fan 8 channels.

Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. 8 way without speed measurement and pwm function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan. Easy installation:it is very easy to setup.
ManufacturerLEIHONG #ad
Height0.75 Inches
Length2.13 Inches
Width1.93 Inches
Part NumberLH-084



DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

DEEP COOL #ad - 4-port fan hub. Compatible with 3-pin/4-pin fans. Support Cable management. Support PWM function. Double-sided adhesive Installation.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Weight0.1 Pounds
Width1 Inches
Part NumberFH-04
Warranty1 Year

4. ZRM&E


ZRM&E PC Fan Speed Controller 8 Way Cooling Fan Hub 3 Gear Speed IDE Molex 1 to 8 Multi Way Splitter 3-Pin Power Socket PCB Adapter

ZRM&E #ad - Type: large 4 pin ide molex 1 to 8 Way Cooling Fan Splitter Hub. 3 level speed controller: Low Speed, High Speed, and Power OFF. Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub. Installation: with thickened 3M glue on the PCB back, you can fix it on your PC case firmly. Input: large 4 pin ide power supply interface port, connect to your PC computer.
BrandZRM&E #ad
Part NumberFANHUB-8WAY

5. Thermalright


5V Fan ARGB Hub, SATA Power Cord Direct Input, Support up to 10 Fans, 10-Port 3 Pin PC Fan Controller, Thermalright Integrated ARGB Fan Hub

Thermalright #ad - Air volume: 82cfm max, wind pressure: 2. 1mm h2o max speed: 1850rpm±10%, higher air flow to enhance cooling performance. Size: 120*120*25mm, current: 025a, interface: 4pin pwm, noise ≤ 29. 6dba, voltage: 12V, dynamic equilibrium. Designed for projects that requires cooling or ventilation; or as a replacement fan for various products. 4-pin pwm version with excellent balance of performance and quietness, supports automatic motherboard speed control. The case fan square frame with excellent airflow and pressure performance: ideal for use on air cooling radiators.
BrandThermalright #ad
ManufacturerThermalright #ad
Height0.87 Inches
Length3.54 Inches
Width1.77 Inches
Part NumberFAN-ARGB HUB-Controller REV.A

6. Zalman


Zalman Fan Speed Controller FANMATE-2

Zalman #ad - Package: rETAIL. Allowable wattage: 6W or Lower. Connector: 3 Pin. Output voltage: 5v ~ 11V +/- 2%.
BrandZalman #ad
ManufacturerZalman #ad
Height1.02 Inches
Length2.76 Inches
Weight1 Pounds
Width1.02 Inches
Part NumberFANMATE-2

7. DS leddess


DS leddess Mini ARGB RF Controller Kit for Rainbow Fans, 14 Key Remote, 3Pin ADD Header, PC Rainbow led Strip 5V, B Series, SATA Power

DS leddess #ad - Support control to ds b series Rainbow fans 3-PIN ARGB Fans. Input sata connector, Support All of the PSU models. The leddess mini rainbow lighting Controller Kit Set Up Lighting Inside Your Computer Case. Rf remote controller, control is more free, 215 Dynamic Light Modes and 4 Static Light Colours. Support have 3pin-add-Header Rainbow LED strip or Fans.
BrandDS leddess #ad
ManufacturerDS leddess #ad
Height0.2 Inches
Length11.81 Inches
Width0.39 Inches
Part NumberDS035

8. coolerguys


Manual 12V DC Variable Speed Controller 4 pin Molex to Dual 3 pin Connector

coolerguys #ad - Click on/off. Moving variable speed control. 12 inch tail on 3 pin side. Designed to work with dc 12v fans. 7 inch tail on 4 pin molex power side. Will fit most standard DC fans with standard 12V 3 Pin connector.
Brandcoolerguys #ad
ManufacturerCoolerguys #ad
Part Number840556090236



Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

ELECTOP #ad - There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. The ten fans will spin at the same speed, that designated by the system for that fan. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function.

Please note 4pin fan speed can be adjusted by temperature control. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. So, then the speed is regulated by the speed for the "source" fan. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%.

Red is expected to be a pass through for the cpu fan. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. You can connect to the CPU fan lead on the system board or the chassis fan lead. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
BrandELECTOP #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P