Top 10 Zhiyun Crane Plus Zhiyun Crane V2 – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.

1. SMALLRIG

#ad

SMALLRIG Mounting Rod Clamp Ring for Zhiyun Crane2 Crane v2 Crane Plus Gimbal Stabilizer for DSLR Camera with 1/4" & 3/8" Thread Locating Points, 18 lb Payload- 2119

#ad
SMALLRIG #ad - High customizationthe rod clamp is specially designed only for zhiyun crane2 / Crane v2 / Crane Plus handheld gimbal stabilizer. This clamp can be attached to 4 positions on the Crane 2, and 1 position on the Crane V2 handle as shown in the picture.

Handheld setupit allows mounting a rod clamp and then two 15mm rods with Shoulder Pad 2077, as well as Handle 998 to hold your Zhiyun Crane 2/V2 on your shoulder. Locating point for arrifeatures 3/8’’ locating holes for arri standard on the side allowing to be attached an Anti-Rotation Magic Arm 2026 to hold your monitor.

Mounting pointsthe extension ring is equipped with a lot of 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070 and Cold Shoe 1960 Please notemax load: 8. 5kg18lbs. It could support most of the camera, led, microphone, and camera accessories such as a monitor, camera handle, etc.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.47 Inches
Length3.31 Inches
Weight0.21 Pounds
Width2.62 Inches
Part Number2119-AU
Model4336305231

2. EVO Gimbals

#ad

Zhiyun Crane Plus & Crane V2 Camera Stabilizers, EVO Gimbals IMR 26500 Li-Ion Rechargeable Batteries for EVO Rage Gen2

#ad
EVO Gimbals #ad - Battery chemistry: Lithium-Ion. Evo gimbals 2x imr 26500 li-Ion Rechargeable Batteries -. Package Quantity: 2. Rechargeable: Yes. Compatibility: evo rage Gen2 & EVO Rage-S gimbals.
BrandEVO Gimbals #ad
ManufacturerEVO Gimbals #ad
Weight0.3 Pounds
Part NumberEVO-50625
ModelIMR 26500 Batteries

3. EVO Gimbals

#ad

Zhiyun Crane Plus & Crane V2 Camera Stabilizers 2 Pack, EVO Gimbals 3600mAh Rechargeable Batteries for EVO Rage Gen2

#ad
EVO Gimbals #ad - Original oem evo gimbals li-ion batteries 3. 7v / 3600mah capacity Each 13. 3wH. In the box: 2 x 3600mah evo gimbals li-ion batteries + 1 x EVO Gimbals Microfiber Cleaning Cloth. Compatible with evo gimbals evo Rage Gen2, Zhiyun Crane Plus and Crane V2. Model battery: evo-50625 | dimensions 26 x 500 mm.
BrandEVO Gimbals #ad
ManufacturerEVO Gimbals #ad

4. Neewer

#ad

Diameter Adjustable 25-45mm Compatible with Zhiyun Crane 2/Crane V2/Crane Plus/Crane/Crane M/ Feiyu G6 Plus/A1000/A2000/MOZA Air Aircross Gimbals Only Grip, Neewer Carbon Fiber Dual Handle Grip

#ad
Neewer #ad - Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Multi-choices of holding ways: provide various shooting ways including positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances.

Adjustable holder socket design: suitable for gimbles diameter within 098-1. 77 inch/25-45 mm, crane m, a1000, a2000, compatible with zhiyun crane 2, crane, crane v2, feiyu G6 Plus, Crane Plus, MOZA Air Aircross and other gimbles as long as its diameter is from 25-45mm. Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold.

Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras. You can hold it tightly without worrying about the falling off due to enduring application. Note:not support DJI Ronin-S.
BrandNeewer #ad
ManufacturerNeewer #ad
Weight1.75 Pounds
Part Number10093965
Model10093965

5. zhi yun

#ad

Zhiyun Quick Setup kit to Attach and Detach Release Tripod, handgrip Quickly for Weebill LAB/Weebill S Zhiyun Crane V2/Plus/2 Smooth 4 Feiyu a2000 AK2000/AK4000 Moza Aircross 2 with EACHSHOT Cloth

#ad
zhi yun #ad - Not for zhiyun Weebill 2. Compatible with zhiyun weEBILL LAB Weebill S Smooth 4. It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Not for zhiyun Crane 3 LAB.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Weight0.11 Pounds
Part NumberZY0022
ModelSG_B07L8BKSLV_US

6. zhi yun

#ad

Zhiyun TransMount Quick Setup Kit 1/4" Thread Mount Well Compatible for Zhiyun Zhiyun Weebill S WEEBILL LAB Crane Plus Crane 2 Crane V2 Crane M with PERGEAR Cleaning Cloth

#ad
zhi yun #ad - Reliable quality〗High performance aluminum alloy materials make sure the quality. The kit allows you to switch between upright mode and underslung mode in a second.

Note: with transmount quick Setup Kit: Only a few seconds, you can change yourholding gesture. Without transmount quick Setup Kit: Screwing the tripod/monopod ontothe stabilizer will take several minutes. Quick release and setup design〗quick setup kit originally created by zhiyun allows you to release and set up the tripod/monopod on the stabilizer quickly instead of screwing. Compact and portable〗Trans Mount Quick Setup Kit is highly portable. It can be applied in monopod and monitor to realize quick setup. Universal 1/4 thread mount〗adopting 1/4" thread mount, it is not only an accessory exclusive to WEEBILL LAB.
Brandzhi yun #ad
Manufacturerzhiyun #ad
Part NumberZhiyun TransMount Quick Setup Kit

7. zhi yun

#ad

Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer

#ad
zhi yun #ad - Lens mounting Clamp. Micro-usB Cable. Battery Compartment. Battery Charger. 2 x 26500 li-ion Battery.
Brandzhi yun #ad
ManufacturerZHIYUN-TECH #ad
Height12.2 Inches
Length4.41 Inches
Weight5.6 Pounds
Width14.02 Inches
Part NumberCRANE PLUS_SML
ModelCRANE PLUS

8. decade

#ad

DECADE Universal Left Side Handle Grip Compatible with DJI Ronin S/Zhiyun Crane 2/Crane V2 Series Gimbal Stabilizer

#ad
decade #ad - Easy to carryquick disassembly and assembly for easy storage and carrying. Suitable for multiple modelsthe l shaped grip is designed for zhiyun and dji gimbal stabilizers.

Suitable for dji ronin s/zhiyun crane, crane plus, crane V2, Crane 2, Crane M/Feiyu Gimbal Moza and other Handheld Gimbal which has 1/4 Screw. What’s in the boxyou can get the handle grip and great shooting experience with your gimbal. The rubber cushion on the bottom is helpful to protect from scratching. Mutilple connectionsfeatures 1/4 and 3/8 locating holes for ARRI standard that allows you to attach more accesseroies, such as magic arm monitor microphone or LED light. Lightweight and durablecnc aluminum alloy body and rubber grip protector. Comfortable to hold and effective to improve your shooting experience. Additional 2 years warranty.
Branddecade #ad
ManufacturerDECADE #ad
Part NumberL01

9. zhi yun

#ad

Zhiyun Mini Dual Grip Lite New Version, Transmount Single Handle Grip L Bracket Rig 1/4 Screw Connector for Zhiyun Crane 2 2S Plus Crane M V2 Series DJI Ronin-S SC Handheld Gimbal Stabilizer

#ad
zhi yun #ad - Enables you to mount on monitor or microphone or fill light on Single Mini Dual Handheld Grip used with Gimbal Stabilizer. Suitable for zhiyun crane 2 crane Plus Crane M Series and other Handheld Gimbal which has 1/4 Screw.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Height0.98 Inches
Length0.98 Inches
Weight0.52 Pounds
Width0.98 Inches
Part NumberTransMount Mini Dual Grip
ModelTransMount Mini Dual Grip

10. Simply Gimbal

#ad

Crane M, Microphones, FMJ Handheld Gimbal Adapter for Mounting Monitors, Zhiyun Crane 2, V2, Crane Plus, and Accessories. Compatible with DJI Ronin-S, Moza Air & Many More -A Mini Dual Grip Black

#ad
Simply Gimbal #ad - Unibody design for increased strength. Copper colored stainless steel locking nut also offers 1/4 female configuration for continued tripod use. Simply gimbal fmj handheld gimbal adapter - 4x double sided male 1/4"-20 Threaded Adapter - Fastening Cap - Adjustable Wristband - Rubber Washer - Simply Gimbal 1 Year Limited Warranty. Material: Lightweight Aerospace Aluminum. Four mounting locations with four stainless steel 1/4-20 mounting screws included.
BrandSimply Gimbal #ad
ManufacturerSimply Gimbal #ad
Height1.8 Inches
Length8.4 Inches
Weight0.85 Pounds
Width6.2 Inches
Part NumberFMJ-1
ModelFMJ Adapter