Top 10 Raspberry Pi IR Camera – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. Longruner

#ad

IR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera by Longruner, for Raspberry pi Camera Day & Night Vision

#ad
Longruner #ad - This can avoid image color cast, which is easier for beginners to use. All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image.

Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your email. 1080p hd webcam - the ir video camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 p @ 60 fps and 640 x480 P 60/90 video Recording, with 5MP Ov5647 1080P webcam sensor. Csi interface - this pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data from the camera back to the processor. Compatible with - this raspberry pi camera compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a +except Pi zero & w.
BrandLongruner #ad
ManufacturerLongruner #ad
Part NumberLC26-US
ModelLC26-US
Warranty1 year warranty

2. Raspberry Pi

#ad

8MP 1080P30 …, Raspberry Pi NoIR Camera Module V2

#ad
Raspberry Pi #ad - All software is supported within the latest version of Raspbian Operating System. 8 megapixel camera capable of taking infrared photographs of 3280 x 2464 pixels. Capture video at 1080p30, 720p60 and 640x480p90 resolutions. Applications: infrared photography, low light photography, monitoring plant growth, CCTV security camera.
BrandRaspberry Pi #ad
ManufacturerRaspberry Pi #ad
Part NumberMS.004.00000101
ModelMS.004.00000101

3. Jun-Electron

#ad

For Raspberry Pi 4 Camera with Acrylic Holder Case, Infrared Night Vision 5M 1080p Video Webcam Compatible Suit for Raspberry Pi 3 B+/Pi 3/Pi Zero

#ad
Jun-Electron #ad - Hd resolution, and also supports 1080p 30fps, the night vision camera is capable of 2592*1944 pixel static images, 720P 60fps and 640*480P 60/90fps video recording. Better low light performance, ir corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition.

Typical usage scenarios, motion detection, 3D printer observe, home security and surveillance, time-lapse photography and other Raspberry Pi camera projects. Compatible with all series, and match 50cm fpc cable for pi zero, fit for Raspberry pi 4 / 3 B+ with 200cm FFC Camera Cable, also can works with your 3D printer to observe the Print progress. New design acrylic case can hold camera make it works more stable, IR led and screws hole, the case reserve the hole for heat-sink, Easy to adjust the filming angle and install the screws.
BrandJun-Electron #ad
ManufacturerJun-Electron #ad
Part NumberJ1011-E2

4. LABISTS

#ad

Pi Zero, 3 B+, 3, LABISTS Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4

#ad
LABISTS #ad - Multiple uses: this pi camera module can be used to take high-definition videos, slow-motion, as well as stills photographs. You can use it for time-lapse, and other video cleverness. New raspberry pi camera module v2: features a sony imx219 8-megapixel sensor with fixed focus lens, it is capable of 3280×2464 pixel static images and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes compared to the 5-megapixel OV5647 sensor of the original camera which is only capable of 2592x1944 pixel static images.

It’s a leap forward in image quality, colour fidelity, and low-light performance. This pi camera works with all models of raspberry pi 1, 2, and there are numerous third-party libraries built for it, 3 and 4.

Easy to install: it attaches via a 15cm ribbon cable to the CSI port on the Raspberry Pi. It has no ir filter that enables it IR sensitive for night times. Powerful upgraded raspberry pi cam: the imx219 sensor is not just a resolution upgrade. It can be accessed through the MMAL and V4L APIs, including the Picamera Python library. You can also use it to build an AI robot or DIY your home security system.
BrandLABISTS #ad
ManufacturerLABISTS #ad
Part NumberNoIR V2.1
ModelV2-NoIR

5. MakerFocus

#ad

MakerFocus Raspberry Pi4 Camera IR, Raspberry Pi4 Camera Night Vision Fisheye Camera 5mp OV5647 IR-CUT Automatically Switching between Day-Vision and Night-Vision Compatible with Raspberry Pi3B+/3B/2B

#ad
MakerFocus #ad - The camera is equipped with photosensitive resistance, plug-in then it can be used. Suitabl for Surveillance Camera. Manual settings are not required, the photographs taken will not be reddish, which also eliminates the need for manual switching. Please note: the led fill lights on both sides will warm upgenerally in 40 to 50℃ when they working, they can keep working 20 hours, please don't worry, but it is normal, it will not damage the camera normally.

5 megapixels ov5647 sensor, support 1080p resolution; 2. 0 aperture F, 1. 7 mm focal length. We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking for your consultation! Instructions video: https://www.

Youtube. Com/watch?v=hoca60gghas; Instruction manual: https://www. Waveshare. Com/w/upload/6/61/RPi-Camera-User-Manual. Pdf ;. The advantage is that during the day, built in IR-CUT, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height2.76 Inches
Length0.79 Inches
Weight0.06 Pounds
Width3.94 Inches
Part Number9PX40532F181E2OI5AOMW8

6. Arducam

#ad

3 B/3 B+, Automatic IR-Cut Switching with IR LEDs for Pi 4, Arducam Wide Angle Day & Night Vision Camera for Raspberry Pi, Pi Zero & W and Other Models

#ad
Arducam #ad - Sharp image: adopts 5mp ov5647 sensor, max. Support all raspberry pi models: work on raspicam commands and Python scripts. Resolution: 2592*1944; high frame rate: [email protected], [email protected], [email protected]; Angle of View: 100 degree D x 80 degree H.

Support raspberry pi zero & w, pi 4, 3 b+, Pi 3, Pi B/2B/B/B+/A. All-day image: built-in motorized ir-cut filter, switched in and out automatically based on light condition only visible light during the daylight and infrared sensitivity during the night with IR LEDs on. Typical usage scenarios: the wide angle lens and better low light performance make this camera be used widely for monitoring Octoprint 3D Printer, Home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects.

Multiple camera cables: 3. 3ft 1m and 5. 9in 15cm 15 pin cables for model a and b, 5. 9in 15cm 15 pin to 22 pin cable for pi zero & w, you can change the cable for different model or usage; Acrylic Holder: Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.
BrandArducam #ad
ManufacturerArducam #ad
Part NumberB003506

7. Arducam

#ad

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219

#ad
Arducam #ad - Frame rates: 1080p30, 720p60 and 640x480p90 Recommended power supply: DC 5V, above 1. 8a. Application: this tiny camera can capture ir photographs, especially suitable for wildlife photography, better performance in the night and low light vision, NDVI in agriculture, Home security and surveillance, etc. What will you get: an 8mp raspberry pi official noir camera v2 with a 15cm original FFC cable, a 50cm FFC cable for model A and B, and a 15cm FPC cable for pi zero & w. Sensor: 8 megapixel imx219, max. Resolution: 3280 H x 2464 V.
BrandArducam #ad
ManufacturerArducam #ad
Part NumberB0209

8. kuman

#ad

Kuman for Raspberry PI Camera Module 5MP 1080p OV5647 Sensor HD Video Webcam Supports Night Vision for Raspberry Pi Model B/B+ A+ RPi 3/2/1/zero/zero W with FFC/FPC Cable Raspberry pi Camera

#ad
kuman #ad - The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording. 5 megapixel ov5647 sensor, Supports up to 2 infrared LED and/or fill flash. Package contains: 2pcs infrared LED Light, 1 piece Infrared Night Vision Webcam Camera Board. Rpi camera, supports raspberry pi model b/b+ a+ rpi 3 2 1 with the FFC Cable, it also support raspberry pi  zero/ zero W with the FPC Cable. Raspberry pi night Vision Camera, supports all revisions of the Pi.
Brandkuman #ad
Manufacturerkuman #ad
Weight0.04 Pounds
Part NumberSC15-CA-F
ModelSC15-1-US
Warranty1 year

9. Arducam

#ad

OV5647 5MP 1080P, Wide Angle Automatic IR-Cut Switching All-Day Image, IR LED for Low Light and Night Vision, Arducam Day-Night Vision for Raspberry Pi Camera

#ad
Arducam #ad - Accessories - 2 heat sinks for ir led boards and 1 ribbon cable for Pi Zero included. Better low light performance - ir corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lighting condition.

Contact arducam for more lens options, technical support and customer services. Raspberry pi compatible - work on raspicam commands and python scripts. Day/night camera - ir cut filter switched in and out automatically. Typical usage scenarios - home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects. Support raspberry pi zero, 3 b+, pi 3, Pi 4, Pi B/2B/B/B+/A. A noir camera that keeps videos and images from washed out or looking pink yet still offers a decent night vision.
BrandArducam #ad
ManufacturerArducam #ad
Height0.03 Inches
Length1.31 Inches
Weight0.05 Pounds
Width0.56 Inches
Part NumberB003503
ModelB003503

10. MakerFocus

#ad

Makerfocus Raspberry Pi Zero W Camera Night Vision Webcam 2 Infrared IR LED Light for Raspberry Pi Zero and Zero W

#ad
MakerFocus #ad - Support versions: raspberry pi night vision camera, supports all revisions of the raspberry piraspberry pi 2/3 need change ffc cable; Note:There is no raspberry pi zero board and FPC cable inside the package. When using this camera, then restart it. Support type:raspberry pi zero /w,support for pixels: the camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p 30 fps, 720 p 60 fps and 640 x480 p 60/90 video recording.

Solution: connect the power supply to GPIO, please note: Normal problems: 1. The computer doesn't recognize the camera; The LED lights doesn't work including one on and one off; The camera doesn't work after a period of use. Please note: the led fill lights on both sides will warm upgenerally in 40 to 50℃ when they working, please don't worry, they can keep working 20 hours, but it is normal, it will not damage the camera normally.

Sensor: 5 megapixel ov5647 sensor, Supports up to 2 infrared LED and/or fill flash. You can adjust the micro adjustable resistorbeside the lights to turned down the lights to Lower temperatures. 2. The led lights always turn on no matter if the camera is turned on or not. Solution: tighten the bolts of the LED and camera, then the LED light will be on only when the camera is turned on.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height1.97 Inches
Length0.79 Inches
Weight0.05 Pounds
Width1.18 Inches
Part NumberAOS101726FDX0L378