Top 10 NATO Rail Grips – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.



HSN2427, SMALLRIG Universal Aluminum NATO Side Handle Grip for DSLR Camera Cage with Cold Shoe Mount Built-in Wrench, Up and Down Adjustable

SMALLRIG #ad - If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Universality for both sidesthe smallrig hsn2427 allows you to switch from the left to right quickly. Mounting pointsit comes with one cold shoe mount and three 1/4”-20 thread holes on the top of the handle allow for mounting a light, mounting arm, microphone, monitor, or other accessories.

Also this handle can be used with a hand strap for more security. Comfortable & lightweightit weighs 237g only and features an aluminum body with anti-slip silicone gel coverings to provide a comfortable and lightweight handheld shooting. Aluminum nato side handlesmallrig aluminum nato side handle hsn2427 is designed to provide a comfortable handheld shooting for cameramen.

Besides, you could slide up and down for your optional positioning. The aluminum side handle is locked via a NATO clamp to make your setup quick release and fits any cages or camera featuring NATO rail on side. If you want to use the handle on the other side of the accessory, use the hex to take off the connection metal part of handle and change the direction. Built-in wrencha built-in wrench on the bottom can be used to adjust the handle up and down based on your needs.
ManufacturerSMALLRIG #ad
Height4.33 Inches
Length2.87 Inches
Weight0.52 Pounds
Width1.89 Inches
Part NumberHSN2427-SR



HTN2439, SMALLRIG Top Handle Grip for NATO Rail Standard with Locating Hole, Anti-Off Designed Cold Shoe Mounts,15mm Rod Clamp for DSLR Camera, Camera Cage

SMALLRIG #ad - Built-in spannerthe nato top handle comes with a hex spanner, which attaches via magnet inside the handle. Anti-off designthe handle is able to secures to any cage or top plate features a NATO rail via the thumbscrew. The handle also offers a 15mm rod clamp for rod compatible accessories.

You can use it for different purposes, you can loosen those screws on the other side and change front to back orientation according to your need. Built-in rod clamp & cold shoe mountsthe handle htn2439 integrates with three cold shoe mounts allows mounting Cold Shoe Monitor Mount like SMALLRIG 1842 and SMALLRIG BSE2346. The twist handle is equipped with three cold shoes. Accessory threadsmultiple 1/4"-20, 3/8”-16 and arri 3/8”-16 threads are provided for accessories such as SMALLRIG Magic Arm 2070, etc.

Qr nato handlesmallrig nato top handle grip 2439 is designed to mounts quickly to a standard NATO rail to provide a balanced gripping point for your camera. One of them in front features an anti-off button to protect your setup from slipping off. So that makes it very easy to use for balancing the camera for handheld use.
ManufacturerSMALLRIG #ad
Height2.72 Inches
Length0.96 Inches
Width5.28 Inches
Part NumberHTN2439-SR



2176, SMALLRIG Camera Cage for Sony A7R III/A7 III with VG-C3EM Vertical Battery Grip w/Cold Shoe, NATO Rail and 3/8'' Locating Holes for ARRI Standard

SMALLRIG #ad - High customizationdesigned only for sony a7riii / a7m3 / a7iii and vg-c3em vertical battery grip without blocking any buttons and ports on the camera, a great choice for videographers/photographers who need to attache for Sony VG-C3EM to the camera.

Better protectionsecure tightly via the 1/4” screw on the bottom and the M2. 5 screw on the right side, prevent the camera from twisting or wiggling. All four corners have holes for the camera wrist wrap and camera neck strap. The battery grip is NOT included in the package. What you get1 x cage; 1 x hex Spanner; 1 x M2. 5 screw. Notesit is only designed to fit a7iii series cameras and vertical battery grips for Sony VG-C3EM, and it is not compatible with other models of battery grips.

Mounting pointsone cold shoe, a nato rail, an arri-style anti-twist accessory mount, and multiple 1/4"-20 and 3/8"-16 accessory threads are built into this handy cage. Recommendationyou could choose additional accessories for a better shooting experience: HDMI Clamp 3637/1679, monitor mount BSE2346, follow focus 3010, lens support 2152, matte box 2660, side handle 2187, etc.
ManufacturerSMALLRIG #ad
Height2.6 Inches
Length6.16 Inches
Weight0.65 Pounds
Width5.71 Inches
Part Number2176-SR



MAGICRIG DSLR Camera Handle Universal Hand Grip NATO Handle Kit with 48mm NATO Rail and Cold Shoe for Camera Cage Rig

MAGICRIG #ad - Balance adjust: except for sliding it forward and backward on the NATO rail to balance the camera's center of gravity, the handle is back and forth adjustable for you to find the balance position of your rig.

So that makes it very easy to use for balancing the camera for handheld use. Mounting points:arrays of 1/4" -20 and 3/8"-16 mounting holes on the handle for mounting additional accessories, such as Ball head, rod clamp, magic arm, etc. It is very easy to assemble and disassemble the handle. Spanner: it comes with an allen wrench on the side, which attaches via magnet inside the handle. Double cold shoe: the handle comes with two built-in cold shoe which could attach to the microphone mount and flash.

You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. Easy disassembly: the nato clamp on one end is compatible with nato rail, simply slide it onto the nato rail and tighten the thumbscrew.
ManufacturerSmpuvte #ad
Weight0.49 Pounds
Part NumberSM-312



SMALLRIG Wooden Mini NATO Handle Side Handgrip with NATO Clamp and Quick Release NATO Rail for Mirrorless Digital Camera DSLR Camera Small Camera Cage, 2978

SMALLRIG #ad - Please do not use it overweight. Note: deviation of wood grain color and stripe is normal. High customizationthe smallrig wooden nato side handle with quick release nato rail 2978 is designed for mirrorless, digital camera, and other small camera users.

Mounting optionsthe flash and microphone can be mounted through the cold shoe, and the wrist strap, such as 2456, can be mounted through the eyelet hole to prevent the camera from accidentally falling off. Compatible with SmallRig Cages 2087, etc. Lightweight & portableit is locked via nato clamp or quick release nato rail 2172 to the side of the cage, it's convenient to compatible and quick release with cage. Ergonomic designmade of aluminum alloy and rosewood with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience.

It weighs only 135g. For right-hand or left-hand usehighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. This mini side handle 2915 provides a secure grip for your NATO rail-equipped camera or camera cage. Note: the maximum bearing capacity of the handle is 3. 5kg/7.
ManufacturerSMALLRIG #ad
Height1.77 Inches
Length2.68 Inches
Weight0.32 Pounds
Width3.54 Inches
Part NumberSRUS-VA-2021012801



NICEYRIG NATO Handle with Quick Release Safety Rail 70mm, 15mm Rail Block DSLR Camera Cage Top Grip Handgrip Applicable for Sony A7SIII /A7RIV/A7RIII/A7III/A7II

NICEYRIG #ad - Equipped with two shoe mounts at both ends for attaching on camera lights, microphone shock mounts, etc. Simply slide onto NATO rail and tighten down the wingnut screw. Get your handle off without needing an Allen key every time.

The nato handle is designed for quick release attaching and detaching on the camera. Attached to any two 1/4"-20 hole via 1/4"-20 screw to provide mount. On each end of the rail has spring loaded pin, which prevents accidental accessory removal. Made of aluminum alloy, lightweight and durable. The 15mm rod clamp allows for attachment of EVF mount or microphone shock mount and so on. You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle. There are 1/4" and 3/8" mounting points for additional accessories attachment.
ManufacturerNICEYRIG #ad
Part Number124



SMALLRIG NATO Rail Handle, Top Handgrip with Mounting Points, Cold Shoe Mount for Camcorder Camera Cage, 1955

SMALLRIG #ad - The handle is equipped with three shoe mounts on the top, such as microphone, magic arm, in the front and at the back respectively, to which the light accessories, could be attached. Except for sliding it left and right on the Rail to keep your camera balance, you can also slide forwards and backwards to find the balance point of your rigs.

Smallrig handles nato handle grip is a sliding top cheese handle for moving shoots, a6000/a6300/a6500 camera cages, X-T2 camera cages, G7, compatibility with small-sized mirrorless camera cages and SWAT NATO Rails: A7/A7r/A7s/A7II/A7RII/A7SII, gh4, G85, gh5, etc.

This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories. It is designed for quick release attaching and detaching on the camera without screws. Simply slide onto safety NATO rail and tighten down the thumbscrew.
ManufacturerSMALLRIG #ad
Height2.6 Inches
Length4.65 Inches
Width0.98 Inches
Part NumberSR-FM01-1955



HTN2362, SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage

SMALLRIG #ad - Accessory threadsthe handle features multiple 1/4"-20 and locating holes for ARRI for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135. One of them in front features an anti-off button to protect your setup from slipping off.

Built-in spannerthe top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. Rotating 360° and anti-off designthe quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. Qr nato handlesmallrig nato handle grip is designed to provide a comfortable handheld use for accessory such as monitor, light and magic arm. The twist handle is equipped with two cold shoes. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need.

Comfortable gripsmallrig htn2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen. So that makes it very easy to use for balancing the camera for handheld use. It is compatible with smallrig camera cage such as SmallRig2203, SmallRig2254, microphone, SmallRig1889.
ManufacturerSMALLRIG #ad
Height1.06 Inches
Length6.14 Inches
Weight0.44 Pounds
Width2.89 Inches
Part NumberHTN2362-SR

9. Nitze


Nitze Lil Stinger Handle Universal Mini Handle Grip with Built-in QR NATO Clamp, PA28M-AK

Nitze #ad - The monitor holder mount supports 180° tilt and 360° swivel with free stop. Dynamic design, arbitrarily adjust the monitor angle which you want. No slip, no sharp edges. Built-in qr nato clampnitze mini top handle grip built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever.

Ergonomic designall aluminum alloy material, Nitze nato clamp top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. Multiple mounting pointsnitze nato rail top handle pa28m-ak is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion.

You can mount it in different locations on the handle for flexibility. Cold shoe adaptermini camera top handle grip equipped with a cold shoe adapter which can be attached by two 1/4” screws. Arri locating holesarri locating holes on the front of the handle can be mounted with Nitze N54-F4 low profile monitor holder.
BrandNitze #ad
Manufacturershenzhenshi Xinyishengwujinyouxiangongsi #ad
Height0 Inches
Length0 Inches
Weight0.49 Pounds
Width0 Inches
Part NumberPA28M-AK



SmallRig Top NATO Handle with NATO Rail Quick Release Handgrip for DLSR Camera Cage Rubber, 2084

SMALLRIG #ad - Besides, nato handle 2005 is rubber coated, thus it offers a very good handheld experience for the cameraman. For all cages smallrig nato handle 2084 is exclusively designed for all cage mounts in the market to bring out the camera's maximum potential.

Mounting points there comes with multiple 1/4" and 3/8" threaded holes on the area of the NATO clamp, which provided many mounting points for attaching additional accessories. It is an assembly of a nato handle 2005 and NATO rail 1409. Safety pins the nato rail 1409 can be mounted on camera cages or cheese plates with two 1/4'' screws, it comes with two safety pins to stop the NATO handle from sliding off.

Quick release it comes with quick attaching and detaching for handheld shooting, works with other accessories for DIY needs. Cold shoe the nato handle 2005 features a cold shoe mount on top to add on-camera lights, microphone shock mounts, or other shoe mount accessories, such as SMALLRIG Magic Arm 1497 can via cold shoe on the top for monitor.
ManufacturerSMALLRIG #ad
Height3.23 Inches
Length5.51 Inches
Weight0.42 Pounds
Width1.81 Inches
Part Number2084-SR