Top 10 HF Antenna Balun – Radio Antennas

As an Amazon Associate I earn from qualifying purchases.

1. NooElec

#ad

Balun One Nine v1, Tiny Low-Cost 1:9 HF Antenna Balun and Unun with Antenna Input Protection for Ham It Up, HackRF and Other HF-Capable Radios. Great for DIY Dipole and Longwire Antennas, RTL-SDR

#ad
NooElec #ad - Excellent specifications. Fully assembled, and easy to use. Only 39. 2mm x 13. 0mm and 5g! Great match for attaching a long wire to the Ham It Up. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.39 Inches
Length1.57 Inches
Weight0.01 Pounds
Width0.39 Inches
Part Number100652
ModelBalun One Nine

2. TecMad

#ad

YouLoop Magnetic Antenna Portable Passive Magnetic Loop Antenna for HF and VHF,with Low Loss Broadband BALUN

#ad
TecMad #ad - This antenna is not waterproof, if you use it outdoors, please do waterproof treatment yourself, such as waterproof glue. Feature:hf response: 10khz to 30 mhz;vhf response: up to 300 mhz;maximum power: 250 mW;It also works to some extent with the RTL-SDR V3 in direct sampling mode if you enable RTL AGC. Low loss broadband baLUN, typical loss is 028 dB. But for radios without super low MDS specs, the signals can be boosted on by using any external low cost HF amplifie. No need to adjust.
BrandTecMad #ad
ManufacturerMarryCash #ad

3. NooElec

#ad

Ham It Up, and Other Capable Radios, Balun One Nine v2, Small Low-Cost 9:1 1:9 Balun with Input Protection & Enclosure for HF & Shortwave. Great for Software Defined Radio RTL-SDR & SDRPlay

#ad
NooElec #ad - At 38mm x 25. 0mm in total size, this balun is a bit larger than our popular Balun One Nine v1, but also has better HF performance and can be used to even lower frequencies.

Very small 9:1 balun meant for attaching long wire and dipole HF antennas to your HF capable SDR, radio or Ham It Up upconverter. Very low insertion loss with a maximum input power of +24dBm. Made in north America. 2 year warranty! Assembled into a custom aluminum enclosure and includes 3 antenna connector adapters and a male SMA to male SMA barrel connector. Designed primarily for HF amateur bands, but specifications are accurate to frequencies up to 80MHz+.
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.39 Inches
Length1.57 Inches
Weight50 Grams
Width1.18 Inches
Part Number100806
ModelBalun One Nine v2

4. Windcamp

#ad

WINDCAMP Gipsy 5-50MHz HF Horizontal Dipole Antenna Ant for Ham Radio Waterproof Balun

#ad
Windcamp #ad - Full-size half-wave dipole antenna level, the classic high efficiency antenna. 3. 4. Special canvas pouch, the volume is very small, very easy to Portable. 2. Common quad-band 5/7/14/21/28-29/50mHz mark, with the bobbin easily adjust the switching frequency. 1. 5:gross weight: 04kg will ship it via fast shipping that you can get it within 13-17days. Fully waterproof Carbon Wei Balun.
BrandWindcamp #ad
ManufacturerWTB-WL001 #ad
Weight0.88 Pounds
Part NumberWTB-WL001
Model4330080798

5. h

#ad

HAM HF Band Radio Antenna Balun QRP Tuner Amateur DIY kit NXO-100

#ad
h #ad - Enjoy. Thx. It allows you to fully enjoy the fun of DIY. 1:9 balun is suitable for antenna. It can easily produce high-performance balun to ensure efficient radio transmission and reception.

It can withstand 100w-200w. 1:1 balun is applicable to bipolar DP inverted V antenna is V Yagi antenna 40-1001:4 balun is suitable for the loop antenna and the Winton antenna 200-400 You will receive the balun kits with the instructions. Or please contact the seller for the PDF instructions. Ham shortwave radio magnetic balance kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz.
Brandh #ad
ManufacturerHechengdianzi #ad
Height1.2 Inches
Length4.2 Inches
Width3.2 Inches
Warranty1

6. shamjina

#ad

Shamjina 49:1 Balun for HF Shortwave End Fed Half-Wave Antenna Ham Radio 100W PEP

#ad
shamjina #ad - This is a 49:1 balun for the end-feeding antenna. It only needs to be equipped with a vibrator of 20 meters in length, 21, and 28, 14, which can naturally resonate in the four amateur bands of 7, and the influence of the height-changing resonance point is very small. Suitable for HAM with certain hands-on ability. Frequency: 5-35MHZ. Standing wave: 1. 5.
Brandshamjina #ad
Manufacturershamjina #ad
Part Numbercd4cf4669ba7a92932e90ffd797e6b00

7. NooElec

#ad

Balun One Nine v2 Barebones, Small Low-Cost 9:1 1:9 HF Antenna Balun and Unun with Antenna Input Protection for Shortwave. Great for Software Defined Radio RTL-SDR, Ham It Up & SDRPlay

#ad
NooElec #ad - Balun one nine is a very small 9:1 HF antenna balun for long wire and dipole antennas. Excellent eSD protection on the antenna input. Includes 3 different terminal block adapters for various wire configurations and diameters. Made in north America. Improved performance over the smaller and lighter Balun One Nine v1, including lower insertion loss and expanded lower frequency limit. Full 1 year warranty! .
BrandNooElec #ad
ManufacturerNooelec Inc. #ad
Height0.39 Inches
Length1.97 Inches
Weight0.02 Pounds
Width0.79 Inches
Part Number100814
ModelBalun One Nine v2

8. Hechengdianzi

#ad

LJJDSLYU HAM HF Band1-30Mhz shortwave Radio Balun Unun DIY kit Radio Wire Loop Antenna, NXO-100 Magnetic Balance

#ad
Hechengdianzi #ad - Ham equipment 1-30mhz shortwave radio magnetic balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz.

You will receive the balun kits with the instructions. Or please contact the seller for the PDF instructions. It allows you to fully enjoy the fun of DIY. 1:1 balun is applicable to bipolar DP inverted V antenna is V Yagi antenna 40-1001:9 balun is suitable for antenna. Enjoy. Thx. It can withstand 100w-200w. It can easily produce high-performance balun to ensure efficient radio transmission and reception. 1:4 balun is suitable for the loop antenna and the Winton antenna 200-400 .
BrandHechengdianzi #ad
ManufacturerHechengdianzi #ad
Height1.4 Inches
Length4.4 Inches
Width3.8 Inches
Warranty1

9. Fafeicy

#ad

1:9 Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture

#ad
Fafeicy #ad - Wide use: the balun has great workmanship, suitable for outdoor setting and QRP use, can perfect replacement for the old one, has a wide range use, very good electronic accessories.

High quality: the shell of the mini balun is made of hard plastic material, not easy to damage, strong and durable, has good performance and a long service life. Characteristic: the withstand power of the 1:9 mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store. Quality assurance: this video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence. Practical: the qrp mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc.
BrandFafeicy #ad
ManufacturerFafeicy #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberFafeicy9g2sr0k31q

10. AEcreative

#ad

AEcreative 10-160 Meter Amateur ham HF Band Radio Wire Loop Antenna Balun Unun DIY kit T200-2 Type 2 Iron Powder ferrite toroid core 16AWG Enameled Magnet Winding Wire

#ad
AEcreative #ad - 10' 16awg 1. 30mm enameled magnet winding Wire, Temperature Rating 155℃, nickel plated brass conectors. Balun box dimension: 3 1/4" x 3 1/8" x 2 1/8".

All hardware to build your own balun/unun up to 1. 5kw, 4:1 or 9:1 balun/unun as desired, for make 1:1, many nice build plan available online we do not provide build plan. Unassembled kit package included: 1xt200-2 toroid, 2x antenna wire connector fit up to 8awg antenna wire, bolts, 1x SO-239 antenna socket, washers, nuts, wire terminals included. Precise pre drilled waterproof balun box, T200-2 type 2 iron powder toroid core, optimum resonant freq range 0-40Mhz.
BrandAEcreative #ad
ManufacturerAEcreative #ad