Top 10 Cold Shoe Mount Adapter 1/4 – Camera Flash Shoe Mounts

As an Amazon Associate I earn from qualifying purchases.



2060, SmallRig Cold Shoe Mount Adapter 2pcs Pack with 1/4"-20 Thread for Camera Cage Flash LED Moniter

SMALLRIG #ad - There comes with two secure bending bevels on the one end to prevent accidental removal. The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe.

Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, such as cage, handle and plate etc. For using on a cage, except for smallrig full cage1661, you only need to lock it on the cage via the included 1/4"-20 screw, the M2.55 threaded is unnecessary. The arrowheads on the cold shoe show the direction to mount additional accessories. Note: this cold shoe mount is not suitable for dji gimbal and not for zhiyun as well. Such as cage for sony a6500 a6300 a6500, cold shoe block, cage for panasonic gh5 gh4 gh3, etc.
ManufacturerSMALLRIG #ad
Height0.35 Inches
Length0.98 Inches
Weight0.04 Pounds
Width0.98 Inches
Part Number2060-SR

2. Anwenk


Camera Hot Shoe Mount to 1/4"-20 Tripod Screw Adapter Flash Shoe Mount for DSLR Camera Rig Pack of 2

Anwenk #ad - Looking for 1/4"-20 camera screw adapters as well? Search"B018SMYL9M" to find camera screw adapters. Material : aluminum alloy. Easily attach dslr accessories to camera hot shoe mount or cold shoe mount. To mount your microphone, camcorder or digital camera, monitor to DSLR, led light, or adapt anything else that has a 1/4-20 receptacle. Easy to use. Flash hot shoe mount with 1/4"-20 tripod screw adapter.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Height0.3 Inches
Length5.2 Inches
Weight0.09 Pounds
Width4.6 Inches
Part Number1/4hoeshoe-2



SmallRig 1/4" Mini Ball Head Cold Shoe Mount Adapter with 1/4"-20 Thread for Camera Phone Cage LED Video Light-3577

SMALLRIG #ad - Wide compatibility: with a 1/4" screw on the top for light or microphone. Portable and lightweight: mini mount 3577 is designed to hold your light onto the top of the camera, Weighing only 20g. Such as id: 3290, 3561, 3157, 3611 and so on.

Portable and Lightweight mini shoe holder, this is a good choice. With cold shoe adapter on the base for more accessories attachment if needed. If you don't want to put too much weight on the camera, Cage or other mounting systems via a cold shoe adapter. Flexible positioning: the aluminium mount enables you to tilt up to 138° to position your light and realize precise lighting.

Note: mini mount support device up to 250g. Anti-scratch: made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable. Toolless installation: come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage. Features an anti-scratch pad on the top to protect the device from scratch.
ManufacturerSMALLRIG #ad
Height1 Inches
Length1.28 Inches
Weight0.04 Pounds
Width0.94 Inches
Part Number3577

4. Anwenk


Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid Update

Anwenk #ad - 100% money Back. Note: camera, flash, umbrella holder and tripod are not included. Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.

1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head. Comes with 1/4"-1/4" male to male screw for your varied configuration. Package includes 1x flash hot shoe mount adapter updated;1x 1/4"-1/4" screw. Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite. Note: may not Work for Sony Flash.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part NumberShoe Mount Adapter
ModelShoe Mount Adapter



2059, SMALLRIG 1/4" Camera Hot Shoe Mount with Additional 1/4" Screw 2pcs Pack

SMALLRIG #ad - If you need one pcs pack, please see the SMALLRIG 761. Package included the mini ball head mount 2059 is two pcs pack. Compatibility the cold shoe adapter works for most cameras including Canon, Fujifilm, Olympus, Panasonic, Pentax, Kodak, Nikon, etc.

Mini ball head smallrig mini ball head mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut. Adjustable direction the ball head can be adjusted into most any position. Note the ball head maximum load: 3 kg.
ManufacturerSMALLRIG #ad
Height1.38 Inches
Length2.36 Inches
Width0.98 Inches
Part Number2059-SR

6. Movo


Lights and More on to Cameras, Movo 5 Pack Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread to Mount Microphones, DSLR Rigs, Cages and More

Movo #ad - Non-electronic; All-Metal Construction. 1 year movo warranty with U. S. A. Based Support. Removable Screw-in Backstops. 5 pack of female hot/cold shoe to 1/4"-20 Male Mounts with Tightening Tool. Allows you to attach standard hot-shoe accessories like microphones, monitors, lights, recorders and more to any 1/4"-20 Standard female tripod thread.
BrandMovo #ad
ManufacturerMovo #ad
Part NumberHM-S5

7. Anwenk


Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4"-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

Anwenk #ad - Material: metal construction with black anodized for higher durability. Smart design - with a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place.

That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel. Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount. Work on monitor, trigger, nikon Canon speedlite flash, magic arm, ring light, mic and any accessories that has a camera type of shoe. Universal 1/4" tripod screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand. Updated: no spring. Updated cold shoe flash stand adapter. Never have to worry about the springs falling out again.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part Numberflash cold shoe -update



SLOW DOLPHIN 1/4 Inch Hot Shoe Mount Adapter Tripod Screw for DSLR Camera Rig2 Packs

SLOW DOLPHIN #ad - Durable and Easy to use. Easy to install microphone, camcorder or digital camera, led light, monitor to DSLR, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle. Fits on the hot shoe of most cameras and can connect 2 cameras together. Material : Anodized aluminum metal. Includes 2 nuts which can be adjusted.
ManufacturerSLOW DOLPHIN #ad
Weight0.07 Pounds
Part NumberSD-120



1/4" Hot Shoe Adapter Mount Camera Shoe Mount Screw Flash Cold Shoe Mount to Tripod Screw Adapter DSLR Camera Rig-4 Packs

FOTYRIG #ad - It includes 2 nuts which can be adjusted. The bottom plate fits securely into dslr/slr camera's hot shoe and screws down tightly. Easy to installtightening knobs opens at a max of 22mm to the point of the angle, fits into any dslr rigs with a shoe plate.

Combo flash shoe mountthis durable pro 1/4 inch hot shoe adapter allow any devices with standard 1/4" screw hole to be installed on a flash hot shoe slot. Stable and rustproofmaterial : aluminum Alloy. 1/4" screw adapter to mount your microphone, camcorder or digital camera, monitor to dslR, LED light, or adapt anything else that has a 1/4-20 receptacle.

The top bolt then fits into the tripod hole at the rear of the digital recorder and also screws down tightly. Widely usedit is ideal for attaching zoom recorder, lcd monitor, led lights, microphones, flash lights, DV monitor, dslR camera rig, DJI Osmo, camcorder, digital camera, sports video camGopro, smart phone and more. Package includes- 4x hot shoe adapter.
BrandFOTYRIG #ad
ManufacturerFOTYRIG #ad
Height3.94 Inches
Length1.57 Inches
Width0.79 Inches
Part NumberPC007

10. zoopper


Zoopper 2 Pack Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Monitor

zoopper #ad - Unique appearanceUnique appearance design, thread groove design is unique, Add visual beauty. Attaches to any 1/4"-20 threaded hole. High qualitysturdy aluminum alloy material with precision CNC machining and black anodized treatment for higher durability.

What you get 2 x cold shoe, our worry-free 12-month warranty, 2 x 1/4"-20 screw, welcome guide, 1 x Hex Spanner, and friendly customer service. Ideal for mounting monitor, microphone shock mounts, hot shoe accessories, flashes, on-camera lights, etc. Secure and solid designthere is a stop screw on the cold shoe to prevent shoe mount accessories from accidentally sliding forward and keep your accessories slide perfectly in right place. High compatibility standard cold shoe mount compatible.
Brandzoopper #ad
Manufacturerzoopper #ad
Height0.55 Inches
Length0.94 Inches
Width1.14 Inches
Part NumberLX-001