As an Amazon Associate I earn from qualifying purchases.
Shutao #ad - The boost module has 2 heat sink that could enhance heat dissipation. Dc-dc step up bboost converter module dc 8. 5v to 50v input voltage, 10v to 60v continuously adjustable output voltage, 15A maximum input current, 12A maximum output current.
The boost module input and output are designed with screw terminals for convenient wire connection and disconnection. Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output.
Hilitand #ad - Note: when using battery, or generator as input power, solar panel, switching power supply, please it is necessary to decrease the battery protection voltage value. Designed with smart temperature control fan -- which will automatically work when temperature reaches about 60, and stop when temperature drops below 60 Adjustable voltage -- this is a non-isolated dc power converter module with long service life.
97% high conversion efficiency -- high quality components ensures high conversion efficiency, up to 97%.
YWBL-WH #ad - This is a non-isolated dc power converter module with long service life. Designed with large heat sinks for better heat dissipation. Widely use for solar power voltage stabilization charging, large power LED driving, etc. High quality components ensures high conversion efficiency, battery pack charging, up to 95%. Operating temperature: -40 to 85if temperature is too high, current and voltage difference Short Circuit Protection: Yes input 15A fuse Reverse Input Protection: No, please enhance heat dissipation Frequency: 150KHz Conversion Efficiency: 95% Efficiency is related to input/output voltage, usually can connect diode in series to the input.
Type: non-isolated step up module boost input voltage: 10~32vdc Input Current: 16A MAX. If more than 8a, please enhance heat dissipation quiescent current: 15matested when converting 12V to 20V; it will increase when output voltage is higher Output Voltage: 10~60VDC continuously adjustable Applies only to where the input voltage is less than the output voltage, can not step down voltage. Output indicator light: with charging indication; it shows red when charging, green when fully charged Output Back Protection: Yes Installation Method: Four 3mm screws NOT included Wiring Method: Terminal blocks.
Aideepen #ad - Widely applicationcan be used for high power solar street lamp driving, DIY adjustable CV CC power, vehicle-mounted and mobile device power, solar power charging, various LED lighting CV driving, and various batteries charging. Featuresinput overcurrent protection; Short circuit protection; Input reverse connection protection; Low battery protection.
It is recommended to use a smaller adjustment range. Diy projectsit adopts 7 electrolytic capacitors and a 33mm high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions.
Output powerinput voltage * 20a, such as: input 12v * 20a = 240w, input 24v * 20a = 480w，input 60v * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. Adjustable voltage 1200w 20a dc converter boost input voltage range is dc 10-60v, output voltage range is DC 12-80V. Can be arbitrary adjustable; Input current: 05-20a max, max output power is 1200W. Exceeds 15a, please add fan cooling）.
DROK #ad - Data save - the boost converter can save up to 10 sets of parameter settings. Notes - 1 no big difference between input and output voltage. Wide application - the step up power converter does great for wind power, solar panels to charge battery, DC generators, and it also can be made as a boost power supply to power devices.
By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Converter can only set a limit on output current; 3 When powering high-power appliances, please turn off the automatic output function, and then press the "OK" button to output.
After the voltage rises to the set voltage, correctly connect the converter, turn on the appliances. It’s easy to save and very convenient to call out parameters at any time you would like to. Also the board is equipped with working indicators to show real-time working status. Otherwise the power loss will increase then the actual output may not be as what expected; 2 Actual output current is mainly decided by the load.
Teyleten Robot #ad - The product is easily broken, we have strengthened the packaging to ensure that it will not be broken during transportation.
Hyuduo #ad - High conversion efficiency: Step up module is made of high quality components, ensuring high conversion efficiency up to 97%. Long service life: boost converter is a non-isolated DC power converter module with a long service life.
It stops when the temperature is lower than 60°C. Stable output: boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC.
Aobao #ad - Can be attached to flat metal for ehancing heat dissipation. Suitable for diy voltage stabilizing power supply, vehicle power supply, high power mobile power supply and so on. Input current: 10a max; static working Current: 10mA The higher output voltage, the higher static current.
FainWan #ad - Output power= input voltage * 10a. Note: please don't use short circuit to adjust the current. E. G. 12v * 10a = 120w 24v * 10a = 240w 60v * 10a = 600W. The boost module circuit structure cannot be adjusted by short circuit.
Dasiter #ad - Dc to dc boost converterthe module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load. Dc to dc boost converter600w high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output; output current can be adjusted; ultra-low input and output pressure difference.
Dc to dc boost converterplease power on the module first, especially when some low-voltage 12V input power supply is connected to the load voltage, which is especially important in high-power loads; the input voltage should be stable, then connect the load, it will fall below 10V, and it is easy to break down the power tube at this time.
Dc to dc boost convertertwo or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid. Dc to dc boost converterspecifications: radiator bottom plate thickness 5mm, booster plate fixed above the radiator, rational design, width 63mm, tooth height 21mm, length 85mm, convenient for users to use directly, integrated design of radiator and booster plate, use long screws fixed directly.
1. Shutao
#ad2Pcs 400W 15A DC-DC Boost Converter Step Up Module, DC 8.5V-50V to DC10V-60V Constant Current Power Supply Module Voltage Regulator Constant Power Heat Sink Adjustable Module for Electric Product
#adThe boost module input and output are designed with screw terminals for convenient wire connection and disconnection. Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output.
More information #ad
When there is a big difference between input and output voltage, please decrease power and current. 400 w dc to dc power module widely used for electric equipment, digital products, laptop and more. It can also be used as a driver for high power LED lights or voltage regulator for solar panels. It is designed with 75v/80a large current dual MOS tube.| Brand | Shutao #ad |
| Manufacturer | Shutao #ad |
| Part Number | 13387-1 |
| Model | 13387-1 |
More information #ad
2. Hilitand
#adDC DC Voltage Step Up Converter Boost Power Module 10-60V to 12-97V 1500W 30A CC CV
#adMore information #ad
High power and stable output, it converts 10-60VDC to 12-97VDC. Otherwise it will cause damage to the battery and the power supply. Widely application -- this boost power module is widely used for high power solar street lamp driving, DIY adjustable CV CC power, solar power charging, various LED lighting CV driving, vehicle-mounted and mobile device power, and various batteries charging. 97% high conversion efficiency -- high quality components ensures high conversion efficiency, up to 97%.
| Brand | Hilitand #ad |
| Manufacturer | Hilitand #ad |
| Height | 2.76 Inches |
| Length | 5.12 Inches |
| Weight | 0.82 Pounds |
| Width | 1.97 Inches |
| Part Number | Hilitand72q1pyhsfd |
More information #ad
3. YWBL-WH
#adDC Boost Converter, DC-DC Step Up Converter Board 10-32V to 12-60V Voltage Regulator Booster Module Adjustable Voltage Step Up Power Supply Module
#adMore information #ad
Output current: 8a related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. Please enhance heat dissipation when current is over 4A Constant Current Output Range: 03~8a turn lights Adjusting Range: 03~8a output power: natural cooling 90WMAX; Enhanced cooling 150WMAX. Type: non-isolated step up module boost input voltage: 10~32vdc Input Current: 16A MAX. If more than 8a, please enhance heat dissipation quiescent current: 15matested when converting 12V to 20V; it will increase when output voltage is higher Output Voltage: 10~60VDC continuously adjustable Applies only to where the input voltage is less than the output voltage, can not step down voltage. Output indicator light: with charging indication; it shows red when charging, green when fully charged Output Back Protection: Yes Installation Method: Four 3mm screws NOT included Wiring Method: Terminal blocks.
| Brand | YWBL-WH #ad |
| Manufacturer | YWBL-WH #ad |
| Height | 0.79 Inches |
| Length | 2.36 Inches |
| Weight | 0.15 Pounds |
| Width | 2.36 Inches |
| Part Number | YWBL-WHepwbdc2t9h |
More information #ad
4. Aideepen
#adAideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V
#adIt is recommended to use a smaller adjustment range. Diy projectsit adopts 7 electrolytic capacitors and a 33mm high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions.
More information #ad
Use a piece of aluminum radiator on the back to dissipate heat ，Reserve fan mounting holes, suitable for more DIY projects. Output powerinput voltage * 20a, such as: input 12v * 20a = 240w, input 24v * 20a = 480w，input 60v * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. Adjustable voltage 1200w 20a dc converter boost input voltage range is dc 10-60v, output voltage range is DC 12-80V. Can be arbitrary adjustable; Input current: 05-20a max, max output power is 1200W. Exceeds 15a, please add fan cooling）.
| Brand | Aideepen #ad |
| Manufacturer | Aideepen #ad |
| Weight | 0.4 Pounds |
| Part Number | LE3557011722 |
| Model | 5824093100 |
More information #ad
5. DROK
#adVoltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink
#adBy manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Converter can only set a limit on output current; 3 When powering high-power appliances, please turn off the automatic output function, and then press the "OK" button to output.
More information #ad
Parameter - input voltage: dc 8-60v; output voltage: dc 10-120V; Input current: 0-15A; Output current: 0-15A. Realtime led display & indicators - the transformer board is designed with bright 4-digit LED to display output voltage, current at default simple mode. After the voltage rises to the set voltage, correctly connect the converter, turn on the appliances. It’s easy to save and very convenient to call out parameters at any time you would like to. Also the board is equipped with working indicators to show real-time working status. Otherwise the power loss will increase then the actual output may not be as what expected; 2 Actual output current is mainly decided by the load.
| Brand | DROK #ad |
| Manufacturer | DROK #ad |
| Weight | 0.64 Pounds |
More information #ad
6. Teyleten Robot
#adTeyleten Robot 1500W 30A DC-DC Voltage Step Up Boost Converter Board Module 10-60V to 12-97V Current CC CV Power Supply with Fan
#adMore information #ad
| Brand | Teyleten Robot #ad |
| Manufacturer | Teyleten Robot #ad |
| Weight | 0.82 Pounds |
| Part Number | D24 |
More information #ad
7. Hyuduo
#adDC-DC Converter Module Boost DC Step Up Voltage Regulator CV Stabilizer Power Supply Module 10-60V to 12-97V 1500W 30A
#adIt stops when the temperature is lower than 60°C. Stable output: boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC.
More information #ad
Widely used: it is widely used in high-power solar street lights, solar charging, car and mobile equipment power supplies, various LED lighting CV drives, DIY adjustable CV power supplies, and various battery charging. Intelligent temperature control: it adopts intelligent temperature-controlled fan design, and automatically works when the temperature reaches 60°C or so.| Brand | Hyuduo #ad |
| Manufacturer | Hyuduo #ad |
| Height | 2.76 Inches |
| Length | 5.12 Inches |
| Weight | 0.82 Pounds |
| Width | 1.97 Inches |
| Part Number | Hyuduohb7gzcn4x6 |
More information #ad
8. Aobao
#adAobao 3pcs 600W Constant Current Boost Converter DC-DC 10V-60V to 12-60V 10A Adjustable Step-up Power Supply Module Booster Constant Voltage Constant Current Power Converter Module
#adMore information #ad
The booster power module adopts high thermal conductivity aluminum PCB, Working Temperature: -40 to +85 degree Celsius. Input voltage: dc 10v-60v; output Voltage: 12-60V continuing adjust. Module type: Non-isolated booster converter module. Output wattage: 6000 watts.| Brand | Aobao #ad |
| Manufacturer | Aobao #ad |
| Part Number | AB3p14577lq |
More information #ad
9. FainWan
#adFainWan 600W Constant Current Boost Converter DC to DC 10V-60V to 12-60V Output Step-up Transformer Module Power Supply Driver Max 10A
#adMore information #ad
Output current: 10a is max. Input dc10v-60v step-up to DC 12-60V output. 6a or more please strengthen the heat dissipation The larger the difference between the input and output pressure the smaller the output current.| Brand | FainWan #ad |
| Manufacturer | FainWan #ad |
| Weight | 0.2 Pounds |
| Part Number | 600W DC to DC |
More information #ad
10. Dasiter
#adDasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer
#adDc to dc boost converterplease power on the module first, especially when some low-voltage 12V input power supply is connected to the load voltage, which is especially important in high-power loads; the input voltage should be stable, then connect the load, it will fall below 10V, and it is easy to break down the power tube at this time.
More information #ad
Dc to dc boost convertertwo or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid. Dc to dc boost converterspecifications: radiator bottom plate thickness 5mm, booster plate fixed above the radiator, rational design, width 63mm, tooth height 21mm, length 85mm, convenient for users to use directly, integrated design of radiator and booster plate, use long screws fixed directly.
| Brand | Dasiter #ad |
| Manufacturer | Dasiter #ad |
| Height | 3.15 Inches |
| Length | 4.13 Inches |
| Weight | 0.58 Pounds |
| Width | 2.76 Inches |
| Part Number | DA095-DC to DC Boost Converter |
More information #ad
