Kreg SML-C125-5000 1 1/4-Inch Pocket Screws, 8 Coarse, Washer Head, 5000-Pack

Kreg SML-C125 - 5000 - Ideal for softer materials like pine, plywood, particle board, MDF, and melamine. Maxi-loc washer head. For maximum rust resistance, look to our Sun-Seal coated weather resistant screws. The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials.

Manufacturer's limited 30-day warranty. Larger threads provide maximum holding power. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. Our screws have a zinc finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance. This is especially important in so Feeter material such as plywoods and composites.

Kreg SML-C125-5000 1 1/4-Inch Pocket Screws, 8 Coarse, Washer Head, 5000-Pack - Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket.

This 1-1/4-inch coarse thread, 2 square drive washer head screw works well in 3/4-Inch thick, so Feeter material.





Kreg SML-F125-5000 1-1/4-Inch Pocket Screws, 7 Fine, Washer Head, 5000-Pack

Kreg SML-F125 - 5000 - Ideal for hardwood material such as oak, hickory, maple, cherry, and walnut. Maxi-loc washer head. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. For maximum rust resistance, look to our Sun-Seal coated weather resistant screws.

Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance. Larger threads provide maximum holding power.

Kreg SML-F125-5000 1-1/4-Inch Pocket Screws, 7 Fine, Washer Head, 5000-Pack - Manufacturer's limited 30-day warranty. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. This is especially important in so Feeter material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials.

This 1-1/4-inch fine thread, 2 square drive washer head screw works well in 3/4-Inch thick, hickory, hardwood material such as oak, maple, cherry and walnut.





Kreg SML-C250-2000 Pocket Screws 2 1/2-Inch, 8 Coarse, Washer Head, 2000 Count

Kreg SML-C250 - 2000 - The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials. 2-1/2" screw for joining 1-1/2" stock. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. This 2-1/2-inch coarse thread, 2 square drive washer head screw works well in 1-1/2-Inch thick material.

Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Ideal for hardwood material such as oak, hickory, maple, cherry, and walnut. Maxi-loc washer head. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket.

Kreg SML-C250-2000 Pocket Screws 2 1/2-Inch, 8 Coarse, Washer Head, 2000 Count - Great for softer materials like pine, plywood, particle board, MDF and melamine. Larger threads provide maximum holding power. Maxi-Loc washer head. For maximum rust resistance, look to our Sun-Seal coated weather resistant screws. Larger threads provide maximum holding power. Manufacturer's limited 30-day warranty.





Kreg D6X2 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems, 2 Pack

Kreg D6X2 - Versatile #2 square driver extension bits. 2-1/2" screw for joining 1-1/2" stock. Maxi-Loc washer head. 6 inches long. Manufacturer's limited 30-day warranty. Great for softer materials like pine, plywood, particle board, MDF and melamine. Larger threads provide maximum holding power. Washer head seats flushly in the bottom of the pocket, eliminating pull through.

Compatible with virtually any drill that accepts exchangeable bits. Kreg d6x2 6-inch #2 square driver bit for kreg pocket hole Systems, 2 Pack Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. Provides the added length needed in certain drilling applications. Ideal for hardwood material such as oak, hickory, maple, cherry, and walnut.

Kreg D6X2 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems, 2 Pack - Maxi-loc washer head. Larger threads provide maximum holding power.





Kreg Hex Shank Pocket-Hole Drill Bit

Kreg QUIK-BIT - Larger threads provide maximum holding power. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Versatile #2 square driver extension bits. Manufacturer's limited 30-day warranty. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. The kreg hex shank pocket-hole drill Bit was designed and constructed with the same rigorous standards as our well-known standard round shank KJD drill bit.

It features the same stepped bit design, the same high quality construction, but also features a new hex shank which increases hold strength and reduces slippage in the chuck. 2-1/2" screw for joining 1-1/2" stock. Maxi-Loc washer head. Ideal for hardwood material such as oak, hickory, maple, cherry, and walnut.

Kreg Hex Shank Pocket-Hole Drill Bit - Maxi-loc washer head. Compatible with virtually any drill that accepts exchangeable bits. Provides the added length needed in certain drilling applications. Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage.





Kreg DB210 Foreman Pocket-Hole Machine, Blue

Kreg DB210 - The adjustable fence positions the workpiece for precise pocket depth, and a pair of adjustable stops provide repeatable accuracy. Ideal for hardwood material such as oak, cherry, maple, hickory, and walnut. Maxi-loc washer head. Plus, micro-pockettm, the new foreman is the first Kreg pocket-hole machine that can create all three types of Kreg pocket holes: Standard, and HD Heavy-Duty.

Great for softer materials like pine, particle board, plywood, MDF and melamine. Larger threads provide maximum holding power. Quick-change chuck allows for fast, tool-free bit changes. Compatible with the Micro-Pocket Bit and Heavy-Duty Bit. The foreman pocket-hole machine item# db210 makes it possible for woodworkers, cabinet shops, contractors, and dedicated do-it-yourselfers to complete projects using Kreg pocket-hole joinery with twice the speed and half the effort of a standard pocket-hole jig.

Kreg DB210 Foreman Pocket-Hole Machine, Blue - Larger threads provide maximum holding power. Clamping capacity-material from 1/2 inch to 11/2 inch thick 13-38mm. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Creates all kreg joint sizes: Standard, Micro, and HD.

Your will immediately appreciate all of the great features the upgraded Foreman has to offer.





Kreg SML-C250B-2000 Blue-Kote Weather Resistant Pocket Hole Screws - 2 1/2", 8 Coarse, Washer Head, 2000 count

Kreg SML-C250B-2000 - Great for softer materials like pine, plywood, particle board, MDF and melamine. Larger threads provide maximum holding power. Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw.

High quiality hardened steel for longevity. Single-step operation starts motor, clamps workpiece, and drills pocket holes. Clamping capacity-material from 1/2 inch to 11/2 inch thick 13-38mm. Sharp edge of self-tapping tip drills a cleaner pilot hole. Each screw has 3 chemically-combined anti-corrosion layers for added durability, and it's made of case-hardened steel so the screws won't bend or break.

Kreg SML-C250B-2000 Blue-Kote Weather Resistant Pocket Hole Screws - 2 1/2", 8 Coarse, Washer Head, 2000 count - Have all the screws you need with this set of 2-1/2" 8-Coarse Washer-Head Blue-Kote WR Pocket Screws, 2000 Ct. Needle sharp point minimizes walking. Quick-change chuck allows for fast, tool-free bit changes. Compatible with the Micro-Pocket Bit and Heavy-Duty Bit. 6 inches long. Powerful 110-v, 5.





Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500 Count

Kreg SML-C1 - 500 - Great for outdoor applications. Kreg sml-c1-500 1-inch #8 coarse washer-head pocket hole screws, 500-Count Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. Performs 400% better in corrosion resistance than our old zinc-plated screws. Provides the added length needed in certain drilling applications.

Two square drive. 2-1/2" screw for joining 1-1/2" stock. Creates all kreg joint sizes: Standard, Micro, and HD. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Sharp edge of self-tapping tip drills a cleaner pilot hole. 500 coarse washer head screws with wide bearing head surface.

Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500 Count - Large maxi-loc head stops when it hits the bottom of the hole. Compatible with virtually any drill that accepts exchangeable bits. Powerful 110-v, 5. 0-amp, 2, 800 rpm motor provides fast drilling. Adjustable stops for repeatable accuracy. Manufacturer's limited 30-day warranty. Needle sharp point minimizes walking.





Kreg SML-C2-3000 Pocket Screws 2-Inch, 8 Coarse, Washer Head, 3000 Count

Kreg SML-C2 - 3000 - Ideal for hardwood material such as oak, cherry, maple, hickory, and walnut. Maxi-loc washer head. Creates all kreg joint sizes: Standard, Micro, and HD. Manufacturer's limited 30-day warranty. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials.

Maxi-Loc washer head. Clamping capacity-material from 1/2 inch to 11/2 inch thick 13-38mm. Large maxi-loc head stops when it hits the bottom of the hole. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Quick-change chuck allows for fast, tool-free bit changes. Compatible with the Micro-Pocket Bit and Heavy-Duty Bit.

Kreg SML-C2-3000 Pocket Screws 2-Inch, 8 Coarse, Washer Head, 3000 Count - This is especially important in so Feeter material such as plywoods and composites. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. 2" screw. 6 inches long. Sharp edge of self-tapping tip drills a cleaner pilot hole.





Kreg SML-C150-1200 1-1/2" Coarse Thread Number 8 Washer Head Zinc Coated Pocket Hole Screws 1200 Count

Kreg Enterprises, Inc. SML-C150-1200 - Compare a kreg screw to an ordinary wood screw or a drywall screw which many use as a general-purpose screw for building and you can see that the Kreg screw has unique features that those other screws don't. 2" screw. Clamping capacity-material from 1/2 inch to 11/2 inch thick 13-38mm. Self-tapping tip. Sharp edge of self-tapping tip drills a cleaner pilot hole.

Ideal for hardwood material such as oak, hickory, maple, cherry, and walnut. Maxi-loc washer head. Case hardened Steel. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Powerful 110-v, 5. 0-amp, 2, 800 rpm motor provides fast drilling.

Kreg SML-C150-1200 1-1/2" Coarse Thread Number 8 Washer Head Zinc Coated Pocket Hole Screws 1200 Count - Adjustable stops for repeatable accuracy. Creates all kreg joint sizes: Standard, Micro, and HD. Every one of those features is there to ensure that you get the best results possible. Quick-change chuck allows for fast, tool-free bit changes. Compatible with the Micro-Pocket Bit and Heavy-Duty Bit.





Kreg SML-C1-1200 1" Washer Head Coarse Thread Number 8 Zinc Coated Pocket Hole Screws 1200 Count

Kreg Enterprises, Inc. SML-C1-1200 - 500 coarse washer head screws with wide bearing head surface. Large maxi-loc head stops when it hits the bottom of the hole. Case hardened Steel. Versatile #2 square driver extension bits. Great for outdoor applications. Compatible with virtually any drill that accepts exchangeable bits. Needle sharp point minimizes walking.

Ideal for hardwood material such as oak, cherry, maple, hickory, and walnut. Maxi-loc washer head. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage.

Kreg SML-C1-1200 1" Washer Head Coarse Thread Number 8 Zinc Coated Pocket Hole Screws 1200 Count - Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity. Single-step operation starts motor, clamps workpiece, and drills pocket holes. Quick-change chuck allows for fast, tool-free bit changes. Compatible with the Micro-Pocket Bit and Heavy-Duty Bit. Washer head seats flushly in the bottom of the pocket, eliminating pull through.