Hornady Universal Shell Holder #8 30 LUGER, 30 MAUSER, 38 SUPER AUTO, 41 AE, 9MM LUGER, 9MM LUGER TAPER CRIMP DIE SET, 9X18 MAKAROV, 9X21, 9X21 TAPER CRIMP DIE SET, 9X23 WIN

#ad
Hornady 390548 #ad - Only hornady shell holders are precision machined from solid steel and then heat treated to perform flawlessly for the life of the press. They also fit on most other brands. Fits:#8 - 30 luger 9mm luger 9x21 38 Super Auto Sport Type: Hunting.

#ad



Hornady 546228 DIESET 2 223 REM Remington Custom Grade Reloading DIE Set Series I Two-Die Set .224

#ad
Hornady 546228 #ad - Locking screws stay free from threads. Custom-grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. Expander spindle improves alignment and enhances accuracy for smoother operation. Spindle lock design aligns the expander spindle to perfectly center itself in the die.

Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body.

Hornady 546228 DIESET 2 223 REM Remington Custom Grade Reloading DIE Set Series I Two-Die Set .224 #ad - It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking-up up" to the next larger caliber. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Every custom-grade new dimension die set comes in a convenient box which lets you store fully adjusted dies, lock-n-load bushings, shell holders and a taper crimp die.

Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. Provides tight tolerances and precise fit. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated. Sliding, in-line seating system assures in-line benchrest alignment of every bullet seated.

#ad



Hornady 044096 Lock-N-Load Die Bushing 10 Pack

#ad
Hornady 044096 #ad - Locking screws stay free from threads. Steel. Change caliber by simple twist of the die counterclockwise. Change dies in seconds! for use with Hornady lock-n-load presses only. Positive locking action holds the dies in rock solid perfect alignment. Easy way to get the most out of your reloading press. Place the bushing in the press and lock it into place with a twist.

. The six lugs on the Bushing will hold the die securely in place. All-steel construction. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. The lock-n-load reloading system is a unique Bushing process that allows dies to be changed with a flick of the wrist. Maximizes reloading time by allowing you to load and unload dies with a simple twist.

Hornady 044096 Lock-N-Load Die Bushing 10 Pack #ad - Simply insert the die into a lock-n-load Bushing.

#ad



Hornady 546515 DIESET 3 9MM LUGER/9X21 Pistol Custom Grade Reloading DIE Set Series II Three-Die Set .355

#ad
Hornady 546515 #ad - Custom-grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. Locking screws stay free from threads. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. A solid, one-piece rod guaranteed not to bend or break. All-steel construction.

Every custom-grade new dimension die set comes in a convenient box which lets you store fully adjusted dies, lock-n-load bushings, shell holders and a taper crimp die. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking-up up" to the next larger caliber.

Hornady 546515 DIESET 3 9MM LUGER/9X21 Pistol Custom Grade Reloading DIE Set Series II Three-Die Set .355 #ad - The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. Change caliber by simple twist of the die counterclockwise. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers.

Threaded and replaceable. Sure-loc lock rings lock the DIE into position and provide precise adjustment. Expander spindle improves alignment and enhances accuracy for smoother operation. Provides tight tolerances and precise fit.

#ad



Hornady 390540 Shell Holder Package 1,2,5,16, 35

#ad
Hornady 390540 #ad - Shell holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Maximizes reloading time by allowing you to load and unload dies with a simple twist. They fit all other Hornady accessories case trimmer, hand-held priming tool, etc.

. Locking screws stay free from threads. A single shell holder may be used for multiple calibers. Hornady steel shell holders also fit most other Brands of reloading presses. Change caliber by simple twist of the die counterclockwise. Positive locking action holds the dies in rock solid perfect alignment. All-steel construction.

Hornady 390540 Shell Holder Package 1,2,5,16, 35 #ad - Sure-loc lock rings lock the DIE into position and provide precise adjustment. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Shell holder kit sizes #1, # 16, #2, #5, #35. Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case Insertion.

#ad



Hornady 085001 Lock-N-Load Classic Ammo Reloading Press

#ad
Hornady 085001 #ad - Locking screws stay free from threads. This unique design actually multiplies and accelerates the leverage you apply to the handle. Computer-aided/driven manufacturing. Change caliber by simple twist of the die counterclockwise. The lock-n-load classic is designed to make reloading quicker and give you the precision to create perfect, consistent loads, round after round.

The positive locking action holds dies perfectly- aligned and rock-solid. Made in the USA. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Super-strong angled frame. This logical development provides the rigidity of the old-style frame with a 30 angle that gives the loader greater visibility and access to work.

Hornady 085001 Lock-N-Load Classic Ammo Reloading Press #ad - Automatically feeds the primer through the center hold of the shell holder, aligning it with the primer pocket in the case. This makes the lock-n-load classic the fastest single action press ever. 6. Shell holder kit sizes #1, #5, #2, # 16, #35. Precision machined from solid steel and heat-treated to perform flawlessly.

Single stage reloading has never been simpler with Hornady lock-n-load classic loader. Instead of screwing dies in, the lock-n-load system lets you change dies with just a simple twist.

#ad



Hornady 544655 Match Grade DIE Set 2 6.5 Creedmoor .264

#ad
Hornady 544655 #ad - All-steel construction. Made in the USA. Hornady match grade dies - Hornady match grade dies give you total control over neck tension when resizing. Some calibers are available in two styles: full-length sizing and shoulder bump neck size. Easy way to get the most out of your reloading press. Bushings sold separately.

Lnl classic loader. Tight tolerances at the press translate into tighter groups at the range. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Made by Hornady. Positive locking action holds the dies in rock solid perfect alignment. Each lock-n-load classic press Comes with primer catcher and three lock-n-load DIE Bushings.

Hornady 544655 Match Grade DIE Set 2 6.5 Creedmoor .264 #ad - Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Tight tolerances at the press translate into tighter groups at the range. Shell holder kit sizes #1, #5, #2, # 16, #35. Precision machined from solid steel and heat-treated to perform flawlessly. Sure-loc lock rings lock the DIE into position and provide precise adjustment.

These dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over sizing your case necks and overworking the brass.

#ad



Hornady HR392608 Improve Shell Plate 30 Luger, 9mm Luger, 9X21, 9X18 Makarov, 38 Super Auto, 9X23

#ad
Hornady HR392608 #ad - Shell holder kit sizes #1, #5, # 16, #2, #35. Precision machined from solid steel and heat-treated to perform flawlessly. All-steel construction. Sure-loc lock rings lock the DIE into position and provide precise adjustment. Positive locking action holds the dies in rock solid perfect alignment. Wide mouth and rounded edge at the opening allow smoother case Insertion.

Maximizes reloading time by allowing you to load and unload dies with a simple twist. Change caliber by simple twist of the die counterclockwise. Made in the USA. Made in the USA. Please note: a single shell plate may be used for multiple calibers. Locking screws stay free from threads. The retainer spring is designed to stay in place when inserting cases into the shell plate.

Hornady HR392608 Improve Shell Plate 30 Luger, 9mm Luger, 9X21, 9X18 Makarov, 38 Super Auto, 9X23 #ad - . Hand crafted and polished for an unmatched finish. A single shell holder may be used for multiple calibers. Gives you total control over neck tension when resizing. Each lock-n-load classic press Comes with primer catcher and three lock-n-load DIE Bushings. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE.

#ad



Hornady C1000 Lock-N-Load OAL Length Gauge Straight

#ad
Hornady C1000 #ad - Each lock-n-load classic press Comes with primer catcher and three lock-n-load DIE Bushings. Easy way to get the most out of your reloading press. For all bolt-action and single-shot firearms, or any firearm with straight-line access to the chamber. One of the best kept secrets in accurate reloading is precise bullet seating depth.

Made by Hornady. You will need a modified Case sold separately to fit your firearm's chamber and thread it onto the gauge. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. All-steel construction. These dies feature the ability to Use interchangeable, self-centering neck size Bushings that eliminate the chance of over sizing your case necks and overworking the brass.

Hornady C1000 Lock-N-Load OAL Length Gauge Straight #ad - Wide mouth and rounded edge at the opening allow smoother case Insertion. A few thousandths of an inch change between the bullet and the rifling can make the difference between average accuracy and real tack-driver performance. Increases accuracy. Can be made to fit any bullet of any profile, lead or jacketed.

Regulates seating depth and the resulting "jump" to the rifling. Locking screws stay free from threads.

#ad



Lyman 7777800 Case Prep Multi Tool

#ad
Lyman 7777800 #ad - Shell holder kit sizes #1, #5, # 16, #2, #35. Precision machined from solid steel and heat-treated to perform flawlessly. The unique handle unthreads in the middle to store all parts. Increases accuracy. Wide mouth and rounded edge at the opening allow smoother case Insertion. Made in the USA. Made with convenience in mind, this case prep tool is able to perform four necessary case prep tasks on rifle and pistol brass from.

17-. 45 caliber. You will need a modified Case sold separately to fit your firearm's chamber and thread it onto the gauge. Change caliber by simple twist of the die counterclockwise. Both ends of the handle are threaded to allow two tool heads to be mounted simultaneously. All-steel construction. Can be made to fit any bullet of any profile, lead or jacketed.

Lyman 7777800 Case Prep Multi Tool #ad - Regulates seating depth and the resulting "jump" to the rifling. Easy way to get the most out of your reloading press. Made in the USA. Gives you total control over neck tension when resizing. Hand crafted and polished for an unmatched finish.

#ad



Hornady Cartridge Gauge mm Luger/x . Luger

#ad
Hornady Mfg 380701 #ad - All-steel construction. These dies feature the ability to Use interchangeable, self-centering neck size Bushings that eliminate the chance of over sizing your case necks and overworking the brass. Gives you total control over neck tension when resizing. A single shell holder may be used for multiple calibers.

Positive locking action holds the dies in rock solid perfect alignment. Easy way to get the most out of your reloading press. Increases accuracy. Made in the USA. Hand crafted and polished for an unmatched finish. Shell holder kit sizes #1, # 16, #5, #2, #35. Precision machined from solid steel and heat-treated to perform flawlessly.

Hornady Cartridge Gauge mm Luger/x . Luger #ad - Each lock-n-load classic press Comes with primer catcher and three lock-n-load DIE Bushings. 9mm luger/9x21. 355. Locking retainer spring removes in seconds for easy disassembly and Cleaning of the DIE. Change caliber by simple twist of the die counterclockwise. Made by Hornady. Unique handle design unthreads to store all parts.

#ad